Recent Publications

2015

  • Hobeck, J. D., and D. J. Inman. “The Jd number: An empirical constant for predicting dual cantilever flutter velocity.” Applied Physics Letters 106.24 (2015): 244103.
  • Pankonien, Alexander M., and Daniel J. Inman. “Spanwise morphing trailing edge on a finite wing.” SPIE Smart Structures and Materials+ Nondestructive Evaluation and Health Monitoring. International Society for Optics and Photonics, 2015.
  • Hobeck, Jared D., Charles MV Laurent, and Daniel J. Inman. “3D PRINTING OF METASTRUCTURES FOR PASSIVE BROADBAND VIBRATION SUPPRESSION.” International Conference on Composite Materials, 2015
  • Reichl, K. K., and Inman, D. J., “Modelling of low-frequency broadband vibration mitigation for a bar experiencing longitudinal vibrations using distributed vibration absorbers,” 20th International Conference on Composite Materials, Copenhagen, Denmark: 2015.
  • Hobeck, J.D.; Inman, D.J., “Low-Cost Pressure Probe Sensor for Predicting Turbulence-Induced Vibration From Invasive Low-Velocity Turbulent Flow Measurements,” in Sensors Journal, IEEE , vol.15, no.8, pp.4373-4379, Aug. 2015
  • Hobeck, Jared D., and Daniel J. Inman. “Magnetoelastic metastructures for passive broadband vibration suppression.” SPIE Smart Structures and Materials+ Nondestructive Evaluation and Health Monitoring. International Society for Optics and Photonics, 2015.
  • Essink, Brittany C.,Jared D. Hobeck, Robert B. Owen, and Daniel J. Inman. “Magnetoelastic energy harvester for structural health monitoring applications.” SPIE Smart Structures and Materials+ Nondestructive Evaluation and Health Monitoring. International Society for Optics and Photonics, 2015.
  • Zhou, Shengxi, et al. “Impact-induced high-energy orbits of nonlinear energy harvesters.” Applied Physics Letters 106.9 (2015): 093901.

2014

  • Zhou, Shengxi, et al. “Broadband tristable energy harvester: Modeling and experiment verification.” Applied Energy 133 (2014): 33-39.
  • Hobeck, J. D., and D. J. Inman. “A distributed parameter electromechanical and statistical model for energy harvesting from turbulence-induced vibration.”Smart Materials and Structures 23.11 (2014): 115003.
  • Cao, Junyi, Shengxi Zhou, and Daniel J. Inman. “Nonlinear Characteristics for Rotatable Magnetically Coupling Piezoelectric Energy Harvesters.” ASME 2014 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. American Society of Mechanical Engineers, 2014.
  • Pankonien, Alexander M., Cassio T. Faria, and Daniel J. Inman. “Synergistic smart morphing aileron: Experimental quasi-static performance characterization.” Journal of Intelligent Material Systems and Structures (2014): 1045389X14538530.
  • Hobeck, Jared D., Damien Geslain, and Daniel J. Inman. “The dual cantilever flutter phenomenon: A novel energy harvesting method.” SPIE Smart Structures and Materials+ Nondestructive Evaluation and Health Monitoring. International Society for Optics and Photonics, 2014.
  • Faria, Cassio T., and Daniel J. Inman. “Modeling energy transport in a cantilevered Euler–Bernoulli beam actively vibrating in Newtonian fluid.”Mechanical Systems and Signal Processing 45.2 (2014): 317-329.
  • Pankonien, Alexander M., and Daniel J. Inman. “Aeroelastic performance evaluation of a flexure box morphing airfoil concept.” SPIE Smart Structures and Materials+ Nondestructive Evaluation and Health Monitoring. International Society for Optics and Photonics, 2014.
  • Faria, Cassio T., Robert B. Owen, and Daniel J. Inman. “Micro-fiber composites performance under thermal cycling for impedance-based SHM applications.”SPIE Smart Structures and Materials+ Nondestructive Evaluation and Health Monitoring. International Society for Optics and Photonics, 2014.
  • Lee, Andrew J., Ya Wang, and Daniel J. Inman. “Energy harvesting of piezoelectric stack actuator from a shock event.” Journal of Vibration and Acoustics 136.1 (2014): 011016.
  • Pankonien, Alexander M., and Daniel J. Inman. “Aerodynamic Performance of a Spanwise Morphing Trailing Edge Concept.” 25th International Conference on Adaptive Structures and Technologies. 2014.
  • Cao, Junyi, et al. “Chaos in the fractionally damped broadband piezoelectric energy generator.” Nonlinear Dynamics 80.4 (2014): 1705-1719.
  • Pankonien, Alexander M., et al. “Synergistic smart morphing aileron: Aero-structural performance analysis.”22nd AIAA/ASME/AHS Adaptive Structures Conference. 2014

2013

  • Wang, Ya, and Daniel J. Inman. “Finite element analysis and experimental study on dynamic properties of a composite beam with viscoelastic damping.”Journal of Sound and Vibration 332.23 (2013): 6177-6191.
  • Wang, Ya, and Daniel J. Inman. “Electronic Damping in Multifunctional Systems.” ASME 2013 Conference on Smart Materials, Adaptive Structures and Intelligent Systems. American Society of Mechanical Engineers, 2013.
  • Lee, Andrew J., Ya Wang, and Daniel J. Inman. “Power Harvesting Prediction of Piezoelectric Stack Actuator From a Shock Event.” ASME 2013 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. American Society of Mechanical Engineers, 2013.
  • Wang, Ya, and Daniel Inman. “Experimental validation for a multifunctional wing spar with sensing, harvesting, and gust alleviation capabilities.” Mechatronics, IEEE/ASME Transactions on 18.4 (2013): 1289-1299.
  • Wang, Ya, and Daniel J. Inman. “Adaptive multifunctional composites.” SPIE Defense, Security, and Sensing. International Society for Optics and Photonics, 2013.
  • Faria, Cassio T., Shashank Priya, and Daniel J. Inman. “Modeling and control of a jellyfish-inspired AUV.” SPIE Smart Structures and Materials+ Nondestructive Evaluation and Health Monitoring. International Society for Optics and Photonics, 2013.
  • Hobeck, Jared D., and Daniel J. Inman. “Electromechanical and statistical modeling of turbulence-induced vibration for energy harvesting.” SPIE Smart Structures and Materials+ Nondestructive Evaluation and Health Monitoring. International Society for Optics and Photonics, 2013.
  • Pankonien, Alexander, and Daniel J. Inman. “Experimental testing of spanwise morphing trailing edge concept.” SPIE Smart Structures and Materials+ Nondestructive Evaluation and Health Monitoring. International Society for Optics and Photonics, 2013.
  • Wang, Ya, and Daniel J. Inman. “A finite element modeling of a multifunctional hybrid composite beam with viscoelastic materials.” SPIE Smart Structures and Materials+ Nondestructive Evaluation and Health Monitoring. International Society for Optics and Photonics, 2013.
  • Pankonien, Alexander M., Cassio T. Faria, and Daniel J. Inman. “Synergistic smart morphing aileron.” Proceedings of 54th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference. 2013.
  • Wang, Ya, and Daniel J. Inman. “Simultaneous energy harvesting and gust alleviation for a multifunctional composite wing spar using reduced energy control via piezoceramics.” Journal of Composite Materials 47.1 (2013): 125-146.